Friday, September 30, 2011

Ducati Hypermotard 1100 EVO, 2011

 
 Ducati Hypermotard 1100 EVO, 2011
North American Specifications
USA MSRP - $11,995 USD

Chassis
FRAME
  • Tubular steel Trellis frame
  • WHEELBASE : 1455mm (57.3in)
  • RAKE : 24°
  • FRONT SUSPENSION Marzocchi 50mm fully adjustable usd forks
  • FRONT WHEEL TRAVEL : 165mm (6.5in)
  • FRONT WHEEL : 5-spoke in light alloy 3.50x17
  • FRONT TYRE Pirelli Diablo Rosso 120/70 ZR17
  • REAR SUSPENSION : Progressive linkage with fully adjustable Sachs monoshock. Aluminium single-sided swingarm
  • REAR WHEEL TRAVEL : 141mm (5.6in)
  • REAR WHEEL : 5-spoke light alloy 5.50x17
  • REAR TYRE : Pirelli Diablo Rosso 180/55 ZR17
  • FRONT BRAKE : 2 x 305mm semi-floating discs, radially mounted Brembo callipers 4-piston, 2-pad.
  • REAR BRAKE : 245mm disc, 2-piston calliper
  • FUEL TANK CAPACITY : 12.4l - 3.3 gallon (US)
  • DRY WEIGHT : 172kg (379lb)

INSTRUMENTS

Digital unit with displays for: Speedometer, rev counter, lap times, time, oil temp, battery voltage, A & B trips, fuel reserve trip, scheduled maintenance. Warning lights for: Neutral, turn signals, high-beam, rev-limit, oil pressure, fuel reserve. Plus: Immobilizer system

WARRANTY
: 2 years unlimited mileage

BODY COLOUR (FRAME/WHEEL)
Black (racing black / black)

VERSIONS
Dual seat
SEAT HEIGHT : 845mm (33.3in)

DDA system-ready for Ducati Performance accessory


Engine
TYPE
L-Twin cylinder, 2 valve per cylinder Desmodromic, air cooled
DISPLACEMENT : 1078cc
BORE X STROKE : 98x71.5mm
COMPRESSION RATIO : 11.3:1
POWER : 95hp (69.9kW) @ 7500rpm
TORQUE : 75.9lb-ft 10.5kgm @ 5750rpm

FUEL INJECTION
Siemens electronic fuel injection, 45mm throttle body
EXHAUST
Lightweight 2-1-2 system with catalytic converter with twin lambda probes

Transmission
GEARBOX : 6 speed
RATIO : 1=37/15 2=30/17 3=27/20 4=24/22 5=23/24 6=24/28
PRIMARY DRIVE : Straight cut gears, Ratio 1.84:1

FINAL DRIVE
Chain, Front sprocket 15, Rear sprocket 41
CLUTCH
Dry multiplate with hydraulic control

Emissions
STANDARD : follows the US Federal Regulation

No comments:

Post a Comment